Dry-Brik II Desiccant (3pk)

$13.95

For use with Professional, Global, Global II and Zephyr models.

The Dry-Brik contained in the Dry & Store family of products has three important functions: (1) to permanently remove the moisture molecules that are released from the devices during the warm drying cycle; (2) to drive the relative humidity inside the box to a much lower level than is possible with just a heater, thus maximizing the drying capability; and (3) to capture odors.

Boxes using heat alone lower the relative humidity by warming the air, but the amount of moisture in the air does not change. While warm air can hold more moisture than cool air, unless the water is removed, it can condense right back where it was when the heat goes off. That’s where the desiccant comes in.

Products without a desiccant might work fine in a desert, but in a humid environment they are simply ineffective. The Dry & Store family of products uses DryMax® technology: a controlled amount of warm dry air, a soft but continuous flow of air around all of the small ports and openings in an electronic device like a hearing instrument, and the powerful Dry-Brik II desiccant to do the job right!

Description

For use with Professional, Global, Global II and Zephyr models.

Physical Characteristics

3 pack of desiccants giving you a total of 6 months protection
Weight: 0.8 oz each (22.8 g)
Size: 1.625” wide x 3” deep x .625” high (4.1 cm x 7.6 cm x 1.6 cm)

Product Compatibility

The Dry-Brik desiccant is compatible with the Global II and Zephyr models.

Composition

The Dry-Brik desiccant is a powerful proprietary molecular sieve, which is a much more aggressive desiccant than silica gel. Moreover, mol sieve (pronounced “MOL SIV”) is better suited for the operating temperature of Dry & Store. Silica gel doesn’t work as well as mol sieve at our operating temperatures.
Frequently Asked Questions

Is it really that important to replace the Dry-Brik every two months or is this just a gimmick to sell stuff?
Any quality device that has drying as one of its benefits must provide a place for the moisture to go when it is removed from the hearing instrument. The Dry-Brik II performs that function, and it performs it very well indeed. Even so, the capacity of the Dry-Brik is not unlimited, and eventually there will be no place for the moisture to go. Changing the Dry-Brik II every two months ensures most users will never reach that saturation point.

My supplier says the Dry-Brik II will stay active for two months. How do I know?
Through testing in a variety of relative humidity conditions, the desiccant type was heavily researched – and the quantity carefully calculated – to ensure at least a two-month life expectancy for a single user operating the Dry & Store appliance 8 hours every night.

What is the shelf-life of Dry-Brik II?
With the foil cover intact and stored in a climate-controlled environment, a Dry-Brik II has a shelf-life of at least 18 months.

Can I recharge the Dry-Brik in my oven?
No. The temperature required to break the polar bond between the adsorbed moisture and the pores of the sorbent material is far too high and would melt the plastic.

The original Dry-Brik eliminated odors. Does the Dry-Brik II also eliminate odors?
Yes. Undesirable odors are caused by molecules of certain compounds (usually organic) that our senses find unpleasant. The millions of microscopic pores in the new sorbent grab odor molecules as tightly as moisture molecules. In addition, the Dry-Brik II contributes to the very low relative humidity in any Dry & Store model, creating an inhospitable environment for odor-causing bacteria to reproduce.

Reviews

There are no reviews yet.

Be the first to review “Dry-Brik II Desiccant (3pk)”

Your email address will not be published. Required fields are marked *

Frequently Asked Questions

Tweak Enhance has four listening modes: Conversation, Restaurant, Traffic, and Outdoors. The noise modes suppress background noise. The rocker switch is used to switch between listening modes.

Press and hold the lower portion of the rocker switch for two seconds then release. Do the same to switch to the other programs.

Enhance-switching listening modes

Once setup is complete, every time you turn on your Tweak Enhance, it will revert to the last program and volume setting you used.

Tweak Enhance includes one set of accessories: a pack of the most commonly used sound tubes (size 2B, right and left) and domes/tips. However, other sizes are available.

It is important for the sound tube and tip to fit properly in your ear. If you need a different size tip or tube, call 1-888-815-3240 for assistance. You can also order online:  https://www.eartech.com/product/simply-tweak-enhance-and-refocus-replacement-tips-and-tubes/

The sound tube delivers amplified sound into your ear. Sound tubes that shipped with your Tweak Enhance and sleeve tips should be tried first. The sound tubes are size 2B. 

If you get feedback or whistling, change to a more closed tip. Also try decreasing the volume.

It is important for the sound tube and tip to fit properly in your ear. If you need a different size tip or tube, or if you continue to have a problem, call 1-888-815-3240 or assistance. 

You can also order online:  https://www.eartech.com/product/simply-tweak-enhance-and-refocus-replacement-tips-and-tubes/

Make sure the tip/dome is not clogged.

Fully charge the battery.

Make sure the hearing aid case and sound tube are clean and dry. (Refer to page 51 in the Enhance user manual.)

Make sure the hearing aid case is positioned correctly behind the ear, and that the tip is positioned properly in the ear canal.

Make sure the volume is turned up, by tapping the upper portion of the rocker switch.

Excessive ear was can prevent sound from entering the ear. Contact your physician.

Changes in your hearing can affect how you hear with Tweak Enhance. Contact a hearing healthcare professional if you suspect any change in your hearing condition.

Tweak Enhance may need to be reset. See page 44 of the user manual for instructions. Follow prompts on-screen to set up the hearing aid.

 

Tweak Enhance is a sophisticated OTC hearing aid utilizing
innovative technology. This unique device allows you to select and set your
desired amplification setting from a range of acoustic alternatives.

Yes, in any listening mode, you can still adjust the volume using the rocker switch. Pressing the upper portion of the rocker switch increases the volume, while the lower portion reduces the volume. 

As you increase/decrease the volume, you will hear a single beep for each sound level. Also, when you reach the highest/lowest level of volume, you will hear beep sounds for each sound level.

Enhance illustration of increasing/decreasing volume level.

 

To turn ON, press and hold the upper portion of the rocker switch until you hear a beep (approx. 3 seconds) then release. While you are holding the rocker switch, it will turn green. The green light will turn off once the hearing aid is ON.

To turn OFF, again press and hold the upper portion of the rocker switch until you hear a beep (approx. 3 seconds) then release. While you are holding the rocker switch, it will turn blue. The blue light will turn off once the hearing aid is OFF.

Also, the hearing aids will automatically power OFF once they are seated properly in the charging base. However, after removing the hearing aids from the base it will be necessary to power them ON using the rocker switch.

illustration of how to turn on/off Enhance

Tweak Enhance is powered by a lithium polymer battery that is rechargeable. It’s best to charge your hearing aid completely prior to each use.

When not in use, turn off the hearing aid to prevent unnecessary battery drain or leave it in the charging base. See page 46 of user manual for instructions on turning power on/off.

Enhance hearing aids have a non-removable lithium-polymer battery. It is not user-changeable. Call Tweak Support for assistance – 1-888-815-3240.

Time to fully charge:
Approximately 3 hours

Battery life of full charge:
Approximately 20 hours
Keep in mind some functions of the hearing aid (volume level, noise compression, etc.) require more energy than others. You may find the battery needs recharging sooner than 20 hours.

No. Moisture is the number one enemy of hearing instruments. It can damage the microphone and other components, resulting in costly repairs. Don’t wear the device while taking a bath, shower, spa treatment or while swimming. (See page 55 of the user manual for a list of tips.)

We recommend the daily use of a DryBoost UV drying appliance. These dryers are available on the Accessories page of the eartech site.

The Tweak device has a best-in-class feedback management system. However, when your hand is near the device, you may hear a whistling noise, which is called “feedback”. This may be caused by amplified sound bouncing off your hand back into the instrument. The noise usually quits when you take your hand away.

If the whistling doesn’t stop once you’ve moved your hand away, ensure that the amplifier case is positioned properly behind the ear, and that the tip is positioned properly in the ear canal.

Try adjusting the volume. Tap the lower portion of the rocker switch to decrease volume.

Make sure the dome/tip and sound tube are not clogged with wax or other debris. (Refer to page 52 of the user manual.)

Instead of the sleeve tip, consider using one of the more closed domes.

Try adjusting the equalizer via the Enhance app – decrease the higher frequencies.

If the above fails to reduce feedback, contact Tweak Support at 1-888-815-3240.

Yes, Tweak Enhance has a 45-day trial period. After using Enhance for 45 days, you can return it for a full refund.

1.800.327.8547